Jiangsu Kailong New Materials Co., Ltd.
Leading Continuous Innovation in Car PPF Technology. Pursuing Outstanding Product Quality and Service Standards. Customer-Centered, Providing Customized Solutions and Excellent Service.
Add to Cart
Heat Repair Self-Adhesive Vehicle Paint Protection Film 8.5 Mil Clear TPU Car PPF
Keep your car looking brand new with our TPU transparent car paint protection film. This high-quality film
uses advanced TPU technology to protect against scratches, chips, and environmental damage while
keeping your vehicle’s paintwork visible. Its transparent finish ensures no change to your car’s aesthetic,
and the self-healing technology effectively addresses minor imperfections. Easy to apply and long-lasting,
the TPU transparent film is essential for maintaining your car’s flawless appearance.
| Typical Application | Paint, Metal & Surface Protection Films | |
| Polymer | Aliphatic Polyurethane (TPU) | |
| Total Thichness | 260-370 micron | |
| TPU | 130-212 ±10 micron | Lubrizol® |
| Glue | 25±5 micron | Ashland® |
| Coating | Hard Coating,Good Resistance to Rain Spots | Cashew® |
| Protective Film | Super Glossy PET Film 50 micron | |
| Release Film | Milky PET Film 70 micron | |
| Width | 60 inches (1.52meters) | |
| Length | 16.4 yards(15meters) | |
| Key Attributes | -Smooth Surfaces | |
| -Against Yellowing | ||
| -Self Healing Function | ||
| -Top Coat Solvent Acid Proof |
Product Features
| Basic Parameter | Test Method | Conclusion |
| Temperature Resistance | -122°F--230℉ | √ |
| Thermal Repair Performance | Copper Brush Under 5kg Pressure, 176°F Hot Water Completed,Repair More Than 90% In Seconds. | √ |
| Chemical Resistance | 10% Sulfuric Acid or Sodium Hydroxide Immersion for 72 Hours | √ |
| Stain Resistance | ASTM E313 9B | √ |
| Stone Chip Impact Resistance | SAEJ 400 passed | √ |
| Puncture Resistance | GB/T 10004 >18N | √ |
| Warranty Range | Water Spots, Rain Stains, Yellowing, Filmsurace Distortion | √ |
| Rain Spot Resistance | No Visible Patches After Anti-Rain Spot Test | √ |
| Coating Adhesion | After Cracks Appear During Stretching, It Will Not Fall Off Due to External Scratches | √ |
| Elongation at Break | ASTM D-1044 | √ |
| Breaking Strength | ASTM D-1045 | √ |
| UV Aging | ASTM D-4329 | √ |
