Climate-Adaptive Clear Gloss PPF - Arctic to Desert Formulations
Geospecific solutions:
• -40°C flexible matrix (Nordic Edition)
• 150°F thermal stability (GCC Edition)
• Salt-neutralizing topcoat (Coastal Edition)
Technical Parameters:
| Typical Application | Paint, Metal & Surface Protection Films |
|
| Polymer | Aliphatic Polyurethane (TPU) |
|
| Total Thichness | 260-370 micron |
|
| TPU | 130-212 ±10 micron | Lubrizol® |
| Glue | 25±5 micron | Ashland® |
| Coating | Hard Coating,Good Resistance to Rain Spots | Cashew® |
| Protective Film | Super Glossy PET Film 50 micron |
|
| Release Film | Milky PET Film 70 micron |
|
| Width | 60 inches (1.52meters) |
|
| Length | 16.4 yards(15meters) |
|
| Key Attributes | -Smooth Surfaces |
|
| -Against Yellowing |
|
| -Self Healing Function |
|
| -Top Coat Solvent Acid Proof |
|
| Basic Parameter | Test Method | Conclusion |
| Temperature Resistance | -122°F--230℉ | √ |
| Thermal Repair Performance | Copper Brush Under 5kg Pressure, 176°F Hot Water Completed,Repair More Than 90% In Seconds. | √ |
| Chemical Resistance | 10% Sulfuric Acid or Sodium Hydroxide Immersion for 72 Hours | √ |
| Stain Resistance | ASTM E313 9B | √ |
| Stone Chip Impact Resistance | SAEJ 400 passed | √ |
| Puncture Resistance | GB/T 10004 >18N | √ |
| Warranty Range | Water Spots, Rain Stains, Yellowing, Filmsurace Distortion | √ |
| Rain Spot Resistance | No Visible Patches After Anti-Rain Spot Test | √ |
| Coating Adhesion | After Cracks Appear During Stretching, It Will Not Fall Off Due to External Scratches | √ |
| Elongation at Break | ASTM D-1044 | √ |
| Breaking Strength | ASTM D-1045 | √ |
| UV Aging | ASTM D-4329 | √ |
Contact us to get more discounts
WhatsApp:+86 181 1430 7817
Email: Betty@kdppf.com
FAQ:
Q: Can we mix climate variants in one order?
A: Our modular production allows 10+ formula combinations – consult our regional spec guide.
